Answer / puneet kumar

LT means low tension(low voltage) refers to 230v & 440v
which we get just after at secondry of tranfomer placed in
colony(city's)
HT means high tension(high voltage) refers to 11kv & 33kv
which is secondry of city's substation and primary of
colony's placed transformer.
after HT then EHT , UEHT

Answer / farhan hashmat

LT is less than 1000 volts, MV Is more than 1000 v upto
66kv,HT is more than 66kv to 132kv , EHV is from 132kv upto
220kv after that more than 220kv is UHV.

Answer / chirag chandarana

-'LV' means the voltage: upto 250V
-'MV' means the voltage: 250 V to 650 V
-‘HV’ means the voltage: 650 V to 33 kV
-‘EHV’ or ‘EHT’ means the voltage exceeding 33 kV
(source: IE Rules, 2010)

Answer / k.prakashchandra

As per IE Rules LT -not exceeding 250 V,MV-not exceeding 650
V and HT -not exceeding 33000V

Answer / j.karthik

Mr.k.Prakashchandra can you able send the IE Rules soft copy
for my mail i.d: karthikdote@rediffmail.com....

My Point of view the

LT Voltage ranges are -- 230volt , 433volt.(less than 433volt)
Medium Voltage(MV) ranges are -- 3.3kV,6.6kV
High Voltage(HT) ranges are -- 11kV,33kV

Answer / sandeep kumar

High Tension voltages are normally not used in home
applications and are in the range of 400V, 11 KV, 33KV,
132KV, 4oo KV etc.

LT means Low Tension and house hold appliances work on this
voltage of 110V or 230 v.

. Draw the vector diagram and condition for the following: 1) Dyn1 2) Ynd0 3) YnYn0

1 Answers  

what are d/f between cfl and pl lamps,

1 Answers  

What is the function of Lightning Arrester & Wavetrap in Power system ??

18 Answers   ABB, Bhel, Energy Infratech, Infosys, NTPC,

what is elcb

2 Answers  

why do we use bundle conductors instead of using single conductor of larger size for high voltage transmission?

7 Answers  

How do we calculate over and under frequency tolerance from generator data?

0 Answers   DPS,

hi this is hema, r there any books in particular for the preparation of the APPSC-A.E.E(electrical), if so please mail me the names ... thank u .

0 Answers   Vizag Steel,

what is the formula for calculating the phase clerance between two phases and phase to earth how to calculate the cable for a motor

0 Answers  

sir please send me previous year questions of jspl of electrical section through which i could prepare myself fpr the test.

0 Answers  

how to syncronize two dg sets

3 Answers  

How do apply electrical 'c'license......pls advice

0 Answers  

When testing an earthing connection, we use a 60 or 100 candle bulb with a phase connected direct from supply and the other wire to the new earthing provided.If the bulb glows then the earth is ok.Else earth connection is not Ok. So, why dont we can use all the home appliances taking a single wire from the phase and the return connection to Earth instead of return connection to neutral?

2 Answers